Search Results

Search found 35296 results on 1412 pages for '12 10'.

Page 438/1412 | < Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445  | Next Page >

  • Windows Server 2003 Exchange OWA email file attachment relogin

    - by ton
    hello guys i have a exchange server running but there is a problem. when i use the web access and i click new email ad i click on the paperclip(to add a attachment) i select a file and then i click Add to upload it. but when my Oulook Web Access hangs its stays loading 10 or 20 seconds. and then it ask for my login again my username and password. when i fill my username and password in again the same happens its stays loading for 10 or 20 seconds and then it ask again for my username and password. can somebody help me on this pleas.

    Read the article

  • Bridging LXC containers to host eth0 so they can have a public IP

    - by Vianney Stroebel
    UPDATE: I found the solution there: http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge#No_traffic_gets_trough_.28except_ARP_and_STP.29 # cd /proc/sys/net/bridge # ls bridge-nf-call-arptables bridge-nf-call-iptables bridge-nf-call-ip6tables bridge-nf-filter-vlan-tagged # for f in bridge-nf-*; do echo 0 $f; done But I'd like to have expert opinions on this: is it safe to disable all bridge-nf-*? What are they here for? END OF UPDATE I need to bridge LXC containers to the physical interface (eth0) of my host, reading numerous tutorials, documents and blog posts on the subject. I need the containers to have their own public IP (which I've previously done KVM/libvirt). After two days of searching and trying, I still can't make it work with LXC containers. The host runs a freshly installed Ubuntu Server Quantal (12.10) with only libvirt (which I'm not using here) and lxc installed. I created the containers with : lxc-create -t ubuntu -n mycontainer So they also run Ubuntu 12.10. Content of /var/lib/lxc/mycontainer/config is: lxc.utsname = mycontainer lxc.mount = /var/lib/lxc/test/fstab lxc.rootfs = /var/lib/lxc/test/rootfs lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.veth.pair = vethmycontainer lxc.network.ipv4 = 179.43.46.233 lxc.network.hwaddr= 02:00:00:86:5b:11 lxc.devttydir = lxc lxc.tty = 4 lxc.pts = 1024 lxc.arch = amd64 lxc.cap.drop = sys_module mac_admin mac_override lxc.pivotdir = lxc_putold # uncomment the next line to run the container unconfined: #lxc.aa_profile = unconfined lxc.cgroup.devices.deny = a # Allow any mknod (but not using the node) lxc.cgroup.devices.allow = c *:* m lxc.cgroup.devices.allow = b *:* m # /dev/null and zero lxc.cgroup.devices.allow = c 1:3 rwm lxc.cgroup.devices.allow = c 1:5 rwm # consoles lxc.cgroup.devices.allow = c 5:1 rwm lxc.cgroup.devices.allow = c 5:0 rwm #lxc.cgroup.devices.allow = c 4:0 rwm #lxc.cgroup.devices.allow = c 4:1 rwm # /dev/{,u}random lxc.cgroup.devices.allow = c 1:9 rwm lxc.cgroup.devices.allow = c 1:8 rwm lxc.cgroup.devices.allow = c 136:* rwm lxc.cgroup.devices.allow = c 5:2 rwm # rtc lxc.cgroup.devices.allow = c 254:0 rwm #fuse lxc.cgroup.devices.allow = c 10:229 rwm #tun lxc.cgroup.devices.allow = c 10:200 rwm #full lxc.cgroup.devices.allow = c 1:7 rwm #hpet lxc.cgroup.devices.allow = c 10:228 rwm #kvm lxc.cgroup.devices.allow = c 10:232 rwm Then I changed my host /etc/network/interfaces to: auto lo iface lo inet loopback auto br0 iface br0 inet static bridge_ports eth0 bridge_fd 0 address 92.281.86.226 netmask 255.255.255.0 network 92.281.86.0 broadcast 92.281.86.255 gateway 92.281.86.254 dns-nameservers 213.186.33.99 dns-search ovh.net When I try command line configuration ("brctl addif", "ifconfig eth0", etc.) my remote host becomes inaccessible and I have to hard reboot it. I changed the content of /var/lib/lxc/mycontainer/rootfs/etc/network/interfaces to: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 179.43.46.233 netmask 255.255.255.255 broadcast 178.33.40.233 gateway 92.281.86.254 It takes several minutes for mycontainer to start (lxc-start -n mycontainer). I tried replacing gateway 92.281.86.254 by : post-up route add 92.281.86.254 dev eth0 post-up route add default gw 92.281.86.254 post-down route del 92.281.86.254 dev eth0 post-down route del default gw 92.281.86.254 My container then starts instantly. But whatever configuration I set in /var/lib/lxc/mycontainer/rootfs/etc/network/interfaces, I cannot ping from mycontainer to any IP (including the host's) : ubuntu@mycontainer:~$ ping 92.281.86.226 PING 92.281.86.226 (92.281.86.226) 56(84) bytes of data. ^C --- 92.281.86.226 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 5031ms And my host cannot ping the container: root@host:~# ping 179.43.46.233 PING 179.43.46.233 (179.43.46.233) 56(84) bytes of data. ^C --- 179.43.46.233 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms My container's ifconfig: ubuntu@mycontainer:~$ ifconfig eth0 Link encap:Ethernet HWaddr 02:00:00:86:5b:11 inet addr:179.43.46.233 Bcast:255.255.255.255 Mask:0.0.0.0 inet6 addr: fe80::ff:fe79:5a31/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:64 errors:0 dropped:6 overruns:0 frame:0 TX packets:54 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4070 (4.0 KB) TX bytes:4168 (4.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2496 (2.4 KB) TX bytes:2496 (2.4 KB) My host's ifconfig: root@host:~# ifconfig br0 Link encap:Ethernet HWaddr 4c:72:b9:43:65:2b inet addr:92.281.86.226 Bcast:91.121.67.255 Mask:255.255.255.0 inet6 addr: fe80::4e72:b9ff:fe43:652b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1453 errors:0 dropped:18 overruns:0 frame:0 TX packets:1630 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145125 (145.1 KB) TX bytes:299943 (299.9 KB) eth0 Link encap:Ethernet HWaddr 4c:72:b9:43:65:2b UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3178 errors:0 dropped:0 overruns:0 frame:0 TX packets:1637 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:298263 (298.2 KB) TX bytes:309167 (309.1 KB) Interrupt:20 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:300 (300.0 B) TX bytes:300 (300.0 B) vethtest Link encap:Ethernet HWaddr fe:0d:7f:3e:70:88 inet6 addr: fe80::fc0d:7fff:fe3e:7088/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:54 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4168 (4.1 KB) TX bytes:4250 (4.2 KB) virbr0 Link encap:Ethernet HWaddr de:49:c5:66:cf:84 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) I have disabled lxcbr0 (USE_LXC_BRIDGE="false" in /etc/default/lxc). root@host:~# brctl show bridge name bridge id STP enabled interfaces br0 8000.4c72b943652b no eth0 vethtest I have configured the IP 179.43.46.233 to point to 02:00:00:86:5b:11 in my hosting provider (OVH) config panel. (The IPs in this post are not the real ones.) Thanks for reading this long question! :-) Vianney

    Read the article

  • iSCSI Disconnects every 30 minutes

    - by Steve Evans
    Every 30 minutes, almost by clockwork, a get the following error on my Windows 2008 R2 servers: Log Name: System Source: MSiSCSI Event ID: 113 Level: Warning Description: iSCSI discovery via SendTargets failed with error code 0xefff0003 to target portal *10.2.62.3 0003260 B06BDRV\L4SC&PCI_163A14E4&SUBSYS_045F1028&REV_20\5&cabe3b7&0&30050200_0 I have 12 identically built servers connected to this iSCSI network and they are all seeing this issue. I've updated drivers and firmware levels without any change. Any other obvious things I should try before engaging my network team and the vendors.

    Read the article

  • Isn't NAT a MUST when a LAN uses rfc 1918 private IPs?

    - by aks
    Isn't NAT a MUST when a LAN uses rfc 1918 private IPs? Can an organization assign its hosts with private IPs and still communicate with the external world without NAT? how can an internal host with a private IP (say 10.1.1.1) communicate with external world without NAT? I mean, how can the reply/response packet from the external world reach the original source as the packet with Dest IP = 10.1.1.1 will get lost as it can not be routed as many organizations can use the same IP. Why doesn't rfc 1918 (Address Allocation for Private Internets) make any mention of NAT?

    Read the article

  • How Can I Find Nth Character in Notepad++?

    - by Teno
    From the following text, I'd like to find a n th character. For example, the 10th character is "u"`. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Pellentesque ac arcu sit amet lorem mollis dignissim ac ut metus. Aliquam sed nulla ut risus sollicitudin luctus vitae eget quam. Nam velit diam, ullamcorper id tempus ac, iaculis sed arcu. According to this page, \w{10,} would work but when I type it in the Find what field of the Findwindow, it produces the message, 'Can't find the text: "\w{10,}"' Thanks in advance.

    Read the article

  • What would cause different rates of packet loss between client and server in UDP?

    - by febreezey
    If I've implemented a reliable UDP file transfer protocol and I have a file that deliberately drops a percentage of packets when I transmit, why would it be more evident that transmission time increases as the packet loss percentage increases going from the client to server as opposed from the server to the client? Is this something that can be explained as a result of the protocol? Here are my numbers from two separate experiments. I kept the max packet size to 500 Bytes and the opposite direction packet loss to 5% with a 1 Megabyte file: Server to Client loss Percentage varied: 1 MB file, 500 b segments, client to server loss 5% 1% : 17253 ms 3% : 3388 ms 5% : 7252 ms 10% : 6229 ms 11% : 12346 ms 13% : 11282 ms 15% : 9252 ms 20% : 11266 ms Client to Server loss percentage varied 1 MB file, 500 b segments, server to client loss 5% 1%: 4227 ms 3%: 4334 ms 5%: 3308 ms 10%: 31350 ms 11%: 36398 ms 13%: 48436 ms 15%: 65475 ms 20%: 120515 ms You can clearly see an exponential increase in the client to server group

    Read the article

  • TFTP PUT Failing Across Hosts

    - by Jason
    I have a TFTP server installed on a CentOS host. /etc/xinetd.d/tftp: service tftp { disable = no socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -c -s /var/lib/tftpboot per_source = 11 cps = 100 2 flags = IPv4 } If I try to PUT a file from a remote host to the host running the TFTP server, I get Transfer Timed Out - however, it does create the file in /var/lib/tftpboot but the file is empty. If I tftp from the tftp server to itself (localhost) and PUT a file, it works fine. I have verified that SELinux is disabled and IPTables are turned off. I can connect from the remote hosts with no issue - just seems to be the PUT I have issue with: [root@SVR01 TEST]# tftp 10.100.2.15 tftp> status Connected to 10.100.2.15. Mode: netascii Verbose: off Tracing: off Literal: off Rexmt-interval: 5 seconds, Max-timeout: 25 seconds tftp>

    Read the article

  • Linux servers going into Halt when pressing Control-D in putty or exit in the shell

    - by Itai Ganot
    Since today at noon, there's a number of Linux CentOS servers which are going to Halt whenever i type exit or use Control-D to close the putty window. Did anyone encounter this weird behavior before? I've checked the aliases list on the servers and there is no alias regarding halt command. After the server came online i've checked the history and saw a "logout" command there but nothing which is related to Halt. At first, i thought it happens only from my computer but later i realized that it happens to everyone which types exit, logout or control+d. 2 of these server are our main iptables firewalls and so it's super critical, your assistance is much appreciated. It looks like that, and it only happens on servers with active IPTables: [root@srv1 bin]# ssh srv2 root@srv2's password: Last login: Sun Nov 11 17:19:41 2012 from 192.168.12.98 [root@srv2 ~]# vim /etc/crontab [root@srv2 ~]# exit logout Broadcast message from root (pts/1) (Tue Nov 13 10:44:04 2012): The system is going down for system halt NOW! Connection to srv2 closed. [root@srv1 bin]# In my troubleshooting steps i came across the command strace, and so i've opened two bash windows to one of the problematic server and i used strace -p PID_of_bash. When i typed in exit in the first shell it did go to halt, attached is the strace output, if you can check it out and tell me if you see anything suspicious i'd be more than thankful. RER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGWINCH, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, 8) = 0 socket(PF_NETLINK, SOCK_RAW, 9) = 3 sendmsg(3, {msg_name(12)={sa_family=AF_NETLINK, pid=0, groups=00000000}, msg_iov(2)=[{"\25\0\0\0d\4\1\0\0\0\0\0\0\0\0\0", 16}, {"exit\0", 5}], msg_controllen=0, msg_flags=0}, 0) = 21 close(3) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "logout\n", 7) = 7 write(2, "There are stopped jobs.\n", 24) = 24 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0 pipe([3, 4]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x2b0e45db6fe0) = 23717 setpgid(23717, 23717) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 close(3) = 0 close(4) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [23717]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WSTOPPED|WCONTINUED, NULL) = 23717 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 ioctl(255, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(255, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395da984, WNOHANG|WSTOPPED|WCONTINUED, NULL) = 0 rt_sigreturn(0x11) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0 ioctl(0, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 ioctl(0, TIOCSWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(0, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig -icanon -echo ...}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT QUIT ALRM TSTP TTIN TTOU], [], 8) = 0 rt_sigaction(SIGINT, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGWINCH, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "[root@g2-lga ~]# ", 17) = 17 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "e", 1) = 1 write(2, "e", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "x", 1) = 1 write(2, "x", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "i", 1) = 1 write(2, "i", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "t", 1) = 1 write(2, "t", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "\r", 1) = 1 write(2, "\n", 1) = 1 rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0 ioctl(0, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig icanon echo ...}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGWINCH, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, 8) = 0 socket(PF_NETLINK, SOCK_RAW, 9) = 3 sendmsg(3, {msg_name(12)={sa_family=AF_NETLINK, pid=0, groups=00000000}, msg_iov(2)=[{"\25\0\0\0d\4\1\0\0\0\0\0\0\0\0\0", 16}, {"exit\0", 5}], msg_controllen=0, msg_flags=0}, 0) = 21 close(3) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "logout\n", 7) = 7 open("/root/.bash_logout", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=24, ...}) = 0 read(3, "# ~/.bash_logout\n\nclear\n", 24) = 24 close(3) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 stat(".", {st_mode=S_IFDIR|0750, st_size=12288, ...}) = 0 stat("/usr/kerberos/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/kerberos/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/local/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/local/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/bin/clear", {st_mode=S_IFREG|0755, st_size=12712, ...}) = 0 access("/usr/bin/clear", X_OK) = 0 access("/usr/bin/clear", R_OK) = 0 stat("/usr/bin/clear", {st_mode=S_IFREG|0755, st_size=12712, ...}) = 0 access("/usr/bin/clear", X_OK) = 0 access("/usr/bin/clear", R_OK) = 0 rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0 pipe([3, 4]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x2b0e45db6fe0) = 23726 setpgid(23726, 23726) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 close(3) = 0 close(4) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [23726]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 wait4(-1, Broadcast message from root (pts/0) (Wed Nov 14 12:41:44 2012): The system is going down for system halt NOW! [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WSTOPPED|WCONTINUED, NULL) = 23726 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 ioctl(255, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(255, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395da634, WNOHANG|WSTOPPED|WCONTINUED, NULL) = 0 rt_sigreturn(0x11) = 0 open("/etc/bash.bash_logout", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 stat("/root/.bash_history", {st_mode=S_IFREG|0600, st_size=28900, ...}) = 0 open("/root/.bash_history", O_WRONLY|O_APPEND) = 3 write(3, "cd /etc/profile.d/\nls\nls -alrt\ng"..., 1120) = 1120 close(3) = 0 open("/root/.bash_history", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0600, st_size=30020, ...}) = 0 read(3, "history \nping g1-lga\nping g1-lga"..., 30020) = 30020 close(3) = 0 open("/root/.bash_history", O_WRONLY|O_TRUNC) = 3 write(3, "grep \"216.18\" *\nhistory \nexit\nvi"..., 27609) = 27609 close(3) = 0 kill(4294965658, SIGTERM) = 0 kill(4294965658, SIGCONT) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, [{WIFSIGNALED(s) && WTERMSIG(s) == SIGTERM}], WNOHANG|WSTOPPED|WCONTINUED, NULL) = 1638 wait4(-1, 0x7fff395dac34, WNOHANG|WSTOPPED|WCONTINUED, NULL) = -1 ECHILD (No child processes) rt_sigreturn(0x11) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395dac34, WNOHANG|WSTOPPED|WCONTINUED, NULL) = -1 ECHILD (No child processes) rt_sigreturn(0xffffffffffffffff) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 setpgid(0, 20458) = -1 EPERM (Operation not permitted) exit_group(1) = ? Process 20458 detached [root@g2-lga ~]#

    Read the article

  • Slow Write Speed on ESXi host

    - by Gregg Leventhal
    I have an ESXi 5.0 free host with an internal datastore of 7.2K 5 disk RAID 5 using a PERC 710 mini RAID controller in a Dell Poweredge R620 Server with 32GB Ram and a 12 Core Xeon. I seem to get slow write speeds in the guests so I checked out ESXTOP and I see 15MB/s write speed there on this host, which is comprable to the guests. What could be causing such horrible write speeds? Is RAID 5 really this slow to write??

    Read the article

  • mounts aren't case-sensitive

    - by Asi
    I mounted a few drives from Linux boxes in my network, but those mounts aren't case-sensitive. The mount command I used ( from the man mount.cifs, case-sensitive should be the default ): mount //10.0.1.10/remote_folder /local_folder -t cifs -o username=xxxx,password=xxxx but those mounts aren't sensitive. for example doing: ls -l /local_folder/testfile.txt ls -l /local_folder/TESTFILE.TXT give's the same result... instead of 'file not found' Couple of important points: All drives are running on Linux machines. My local machine is running Fedora 18 and it is case-sensitive for ANY folder/file expect the mounted drives. All drive/mounts are case-sensitive when when doing SSH. So if I SSH from my local machine to a remote machine, doing ls -l /local_folder/TESTFILE.TXT will say file not found as it should. So I believe the issue is in my local machine and not in the way I did the mount. but I'm not sure where to look next (I'm new to Linux)

    Read the article

  • Ubuntu login takes 15 seconds, "I/O error dev fd0 sector 0"

    - by Dan
    After upgrading to Ubuntu 10.04, when I first login it takes 10+ seconds where it just sits at the gdm backgroup before taking me to gnome. By switching to a terminal window during this 10 seconds I saw the error message "I/O error /dev/fd0 sector 0" being outputted. I assume this has to do with the floppy drive... but I don't even have a floppy drive! How do I disable this device and make this error message go away (and hopefully fix the long wait)? Thanks.

    Read the article

  • How can I change exim's DKIM and SPF for emails sent?

    - by 0pt1m1z3
    I've now spent 2 hours trying to figure out this issue and I am about to give up and go to bed. I've been having issues with Gmail rejecting emails from my VPS server because of false spam alerts (probably caused by lfd sending too many emails). So I changed my Exim config to send emails from a different IP (my VPS comes with 3) and that fixed the issue. I also enabled DKIM and SPF on my domains for added measure. But now, all my emails appear as ("From: Sender Name via server.domain1.com") where server.domain1.com is my VPS hostname. I previously had the same issue in Outlook and turning off "Set SMTP Sender: headers" solved that problem. But I believe adding the DKIM and SPF now makes Gmail add "via server.domain1.com" to my messages. How do I fix this? This is a typical header for a message (as it appears at gmail): Delivered-To: [email protected] Received: by 10.60.44.163 with SMTP id f3csp248622oem; Thu, 29 Mar 2012 21:23:18 -0700 (PDT) Received: by 10.50.106.200 with SMTP id gw8mr452788igb.10.1333081398523; Thu, 29 Mar 2012 21:23:18 -0700 (PDT) Return-Path: <[email protected]> Received: from domain2.com ([X.X.X.X]) by mx.google.com with ESMTPS id y1si810998igb.3.2012.03.29.21.23.18 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 29 Mar 2012 21:23:18 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates X.X.X.X as permitted sender) client-ip=X.X.X.X; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates X.X.X.X as permitted sender) [email protected]; dkim=pass [email protected] DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=server.domain1.com; s=default; h=Date:Message-Id:From:Content-type:MIME-Version:Subject:To; bh=wF8bBRgh01EYg4t5DAeVPv1Ps906UVIeRnQCb/HvSYw=; b=k/Pg7lnrO+Ud/z1mOTv+O/3DiJzzQgyBhfIizIaFHM8tF/eNJt5P2k+9yQB224sxYstZIWwVRBJmiqvcM1QhARv1HWqWma0crppZ3JOn+LRHANan634OBi+58SIRA+gu; Received: (Exim 4.77) id 1SDTVE-0005HA-9Y for [email protected]; Fri, 30 Mar 2012 00:31:56 -0400 To: [email protected] Subject: Password Reset Request MIME-Version: 1.0 Content-type: text/html; charset=iso-8859-1 From: Sender Name <[email protected]> Message-Id: <[email protected]> Date: Fri, 30 Mar 2012 00:31:56 -0400 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - server.domain1.com X-AntiAbuse: Original Domain - domain2.com X-AntiAbuse: Originator/Caller UID/GID - [507 504] / [47 12] X-AntiAbuse: Sender Address Domain - server.domain1.com

    Read the article

  • windows 2008 R2 TS printer security - can't take owership

    - by Ian
    I have a Windows 2008 R2 server with Terminal server role installed. I'm seeing a problem with an ordinary user who is member of local printer operators group on the server. If the user opens a cmd window using ‘run as administrator’ they can run printmanager.msc without needing to enter their password again. In printmanager they can change the ownership of redirected (easy print) printers without problems. If, from the same cmd window, they use subinacl to try and change the onwership of the queue to themselves they get access denied: >subinacl.exe /printer "_#MyPrinter (2 redirected)" /setowner="MyDom\MyUsr" Elapsed Time: 00 00:00:00 Done: 1, Modified 0, Failed 1, Syntax errors 0 Last Done : _#MyPrinter (2 redirected) Last Failed: _#MyPrinter (2 redirected) - OpenPrinter Error : 5 Access denied so, same context, same action but one works and one doesn't. Any ideas for this odd behaviour? I'm using subinacl x86 on an x64 server as I can't find anything more up to date. I've tried with icacls and others but couldn't get them to do anything with printers. EDIT: added after Gregs comments regarding setacl below If I log into the TS server as Testusr and open Admin Tools Printer Admin (as administrator) and then type mydomain\testusr and the testusr's password, then I can change the ownership of the printer queue and set testusr as the owner. However if I open cmd as administrator and, again, type mydomain\testusr and the users password when I try to change the ownership of my redirected printer I get the following: C:\>setacl -on "Bullzip PDF Printer (12 redireccionado)" -ot prn -actn setowner -ownr n:mydom\testusr WARNING: Privilege 'Back up files and directories' could not be enabled. SetACL's powers are restricted. WARNING: Privilege 'Restore files and directories' could not be enabled. SetACL's powers are restricted. INFORMATION: Processing ACL of: <Bullzip PDF Printer (12 redireccionado)> ERROR: Enabling the privilege SeTakeOwnershipPrivilege failed with: No todos los privilegios o grupos a los que se hace referencia son asignados al llamador. [meaning not all referenced privs or groups are assigned to the caller] SetACL finished with error(s): SetACL error message: A privilege could not be enabled maybe I'm getting something wrong but if the built in windows tool can do it with just membership of the 'print operators' group then setacl should be able to as well, no? However setacl seems to depend on other privileges, which in reality are not required to do this.

    Read the article

  • CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

    - by Quanano
    We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

    Read the article

  • DHCP for Multiple Subnets

    - by TheD
    So this is the current setup - essentially I would like to get my DHCP server, serving DHCP requests for two seperate subnets. Netgear DG834G acting as a modem connected to a Sonicwall Pro 2040. X0 - LAN - 192.168.1.0/24 X1 - WAN - <WAN-IP> X2 - WLAN - 192.168.10.0/24 At the moment, I have a 2008R2 server with DHCP installed, with an IP address on the 192.168.1.0/24 range handling DHCP fine for this subnet. The Sonicwall is configured correctly - anything connected to the WLAN has Full Allow to anything in the LAN, and vice versa but it will not lease an IP from my Server. I've also added another IP address to the server, so the physical NIC now has two IP's: 192.168.1.2 and 192.168.10.2 with a DHCP scope configured for each. Still no luck! Any ideas? Thanks!

    Read the article

  • Excel graph: turn stacked bar chart into part bullet chart

    - by Mike
    I've a simple data file that has one column of actuals and another of target against categories. I would like to turn the TARGET figure into a 'Bullet marker'. I've seen it done on other graphs but I'm struggling with the category column being overwritten with the xy axis values. Or if I get close to doing it then the xy markers are not central. I've checked out Peltier but his examples are based on even more comlicated data than mine, so the steps required didn't seem to match up. Help greatly appreciated. Thanks Mike. Example Data: Cat Actual target A 10 15 B 10 12 C 20 17

    Read the article

  • Open and scroll through 42 GB text file in Mac OS X

    - by Django Johnson
    I am running Mac OS X 10.8.4 (Mountain Lion) and I am trying to open and scroll through a 42 GB .XML file. I plan on using an XML parser to parse through it and delete parts, but first I need to know how the document is structured so I can know what parts to save. How can I open this text / XML file and scroll through it so I can get a glimpse of its structure? I tried my default text-editor, text-mate, and that couldn't open it. I tried gEdit and that shows the first 10 or so lines, but then quits after trying to load the rest. I would greatly appreciate any and all suggestions!

    Read the article

  • Multiple servers acting like a single one with all the hardware?

    - by marc.riera
    Hello, by now I have 10 servers for hpc, power computing oriented. My users need to launch several processes using qmake. The users are used to work with ubuntu 9.10, and the software from the repositories is switable for them. I've deployed ubuntu 9.10 to all 10 servers (pxe rocks). By now we work with parallel-ssh and cluster-ssh, which allows as to launch the same process to all servers. With this tools this tools the servers remain as independent but with the same software and the same launched command. Now we would like to go to next step and see all the servers as a single one with all the resources from the other 9 as if was its resources. The difference would be substantial in time to process and also time to design the command to launch. Any advice on wich software to use will be very useful? Thanks

    Read the article

  • Why is awstats reporting my static IP instead of Domain Name?

    - by Austin
    In AWStats under: "Links from an external page (other web sites except search engines)" it has generated a list of pages that had linked to my page. I see pages like: Bing, YouTube, HotFrog, etc.. However, there are many internal links within the pages. Towards the bottom it is reporting as followed: http://72.249.150.9/distributors.php 5 2.4 % http://72.249.150.9/contact/ 5 2.4 % http://72.249.150.9/catalog/ 4 1.9 % http://72.249.150.9/flex-point-hockey-grip.php 5 2.4 % http://72.249.150.9/sticky-grip-foam.php 5 2.4 % http://72.249.150.9/video.php 10 4.8 % http://72.249.150.9/dealers/ 5 2.4 % http://72.249.150.9/feedback/ 5 2.4 % http://72.249.150.9/products.php 10 4.8 % http://72.249.150.9/ergo-hockey-grip.php 5 2.4 %

    Read the article

  • Using sed, how can I delete all blank lines?

    - by Steve
    Using sed, how can I delete all blank lines? Input file: Steve Blenheim:238-923-7366:95 Latham Lane, Easton, PA 83755:11/12/56:20300 Betty Boop:245-836-8357:635 Cutesy Lane, Hollywood, CA 91464:6/23/23:14500 Igor Chevsky:385-375-8395:3567 Populus Place, Caldwell, NJ 23875:6/18/68:23400 Norma Corder:397-857-2735:74 Pine Street, Dearborn, MI 23874:3/28/45:245500 Jennifer Cowan:548-834-2348:583 Laurel Ave., Kingsville, TX 83745:10/1/35:58900

    Read the article

  • OpenVPN Setup - Service Won't Start

    - by Lenwood
    I'm in the process of setting up OpenVPN on a VPS running Debian 6. I've walked step-by-step through this guide twice now, and I can't get the service to start. When I start the service, the error reported in the log file is: Cannot ioctl TUNSETIFF tun: Inappropriate ioctl for device (errno=25) I've searched the web a few times and I'm not finding anything helpful. I've tried: Changing file permissions: no change Deleting the file: get an error stating no file found (errno=2) Making a folder named "tun": get an error stating no file found (errno=2) I've wiped my installation and completed the steps verbatim twice now. I get no errors along the way, just the error above within my log file. The contents of my server.conf file are listed below, minus all the comments for brevity. Can anyone help? port 1194 proto udp dev tun ca ca.crt cert myserver.crt key myserver.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log log openvpn.log verb 3

    Read the article

  • Fill a table from a RAND based formula in Excel 2010

    - by Greg Reynolds
    I am trying to do a Monte Carlo simulation using Excel, but a lot of the tutorials I have found are either for older versions of the product, or are not quite what I am after. A simple example of the kind of think I am after is: Cell A1 contains the formula to simulate (for example int(6*rand())+1 to simulate rolling a dice). I have 10 rows of "Trials". What I want is to somehow point each row at a different calculation of the formula in A1. So I would end up with something like Trial Value 1 2 2 5 3 6 4 2 5 1 6 3 7 2 8 4 9 2 10 1 I have tried playing with some of the "What-if Analysis" tools, but I am a bit lost.

    Read the article

  • OpenOffice Calc - Highlighting the higest value in a column

    - by cornjuliox
    So I've got this spreadsheet open using OpenOffice Calc (ver 3.3.0) and its set up a little like this: A B C D 1.name quantity price total 2.foo 10 10 100 3.bar 20 6 120 4.red 30 7 210 Each cell in the "total" column is obtained by multiplying the two cells to the left of it, and what I'm trying to do is to get it so that Calc highlights the highest value in the total column (even better if it could highlight the entire row). I've tried using MAX(D1:D4) in the Conditional Formatting section, but it highlights multiple values. How do I get it to highlight just the highest value?

    Read the article

  • Changing Windows 'hosts' file in guest OS under Parallels Desktop 6 on Mac

    - by ling
    I am running Win7 in a Parallels Desktop 6 on Mac. On the mac, I use /etc/hosts : 127.0.0.1 mysite and it works fine : I can type mysite in the url and the website will display. What I want to do is be able to reproduce the same on Win7 with IE8 for example. Another guy did it successfully here but I can't : Parallels: How to see a Mac-hosted website from Windows? On Mac : ifconfig -a vnic0 10.211.55.2 on Win7 I tried this C:\Windows\System32\drivers\etc\hosts 10.211.55.2 mysite What am I missing ?

    Read the article

  • How does this main domain have a CNAME record?

    - by TRiG
    I was under the impression that only subdomains could have CNAME records: main domains need to define all their own records. However, apt-get.com seems to have only a CNAME record. How can this work? $ dig apt-get.com ; <<>> DiG 9.8.1-P1 <<>> apt-get.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 45743 ;; flags: qr rd ra; QUERY: 1, ANSWER: 9, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;apt-get.com. IN A ;; ANSWER SECTION: apt-get.com. 86336 IN CNAME thie5ku9.dsgeneration.com. thie5ku9.dsgeneration.com. 60 IN A 208.73.211.242 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.246 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.166 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.232 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.161 thie5ku9.dsgeneration.com. 60 IN A 208.73.210.233 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.186 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.188 ;; Query time: 59 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Tue Jun 10 15:05:48 2014 ;; MSG SIZE rcvd: 193 $ dig apt-get.com ns ; <<>> DiG 9.8.1-P1 <<>> apt-get.com ns ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 43831 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;apt-get.com. IN NS ;; Query time: 26 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Tue Jun 10 15:12:37 2014 ;; MSG SIZE rcvd: 29 $ dig apt-get.com ns @b.gtld-servers.net ; <<>> DiG 9.8.1-P1 <<>> apt-get.com ns @b.gtld-servers.net ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 38228 ;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 2, ADDITIONAL: 2 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;apt-get.com. IN NS ;; AUTHORITY SECTION: apt-get.com. 172800 IN NS ns1.domainrecover.com. apt-get.com. 172800 IN NS ns2.domainrecover.com. ;; ADDITIONAL SECTION: ns1.domainrecover.com. 172800 IN A 66.45.232.66 ns2.domainrecover.com. 172800 IN A 65.23.159.179 ;; Query time: 70 msec ;; SERVER: 192.33.14.30#53(192.33.14.30) ;; WHEN: Tue Jun 10 15:07:05 2014 ;; MSG SIZE rcvd: 111 The domain does resolve. I get the following headers: GET / HTTP/1.1 User-Agent: Testing_Sniffer/4.15 Host: apt-get.com Accept: */* HTTP/1.0 200 (OK) Cache-Control: private, no-cache, must-revalidate Connection: Keep-Alive Pragma: no-cache Server: Oversee Turing v1.0.0 Content-Length: 1347 Content-Type: text/html Expires: Mon, 26 Jul 1997 05:00:00 GMT Keep-Alive: timeout=3, max=96 P3P: policyref="http://www.dsparking.com/w3c/p3p.xml", CP="NOI DSP COR ADMa OUR NOR STA" Set-Cookie: parkinglot=1; domain=.apt-get.com; path=/; expires=Wed, 11-Jun-2014 14:10:37 GMT <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd"> <!-- turing_cluster_prod --> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>apt-get.com</title> <meta name="keywords" content="apt-get.com" /> <meta name="description" content="apt-get.com" /> <meta name="robots" content="index, follow" /> <meta name="revisit-after" content="10" /> <meta name="viewport" content="width=device-width, initial-scale=1.0" /> <script type="text/javascript"> document.cookie = "jsc=1"; </script> </head> <frameset rows="100%,*" frameborder="no" border="0" framespacing="0"> <frame src="http://apt-get.com?epl=5PfLSSqWrYDAt-gbwMDK_rA3b1UJCYVTJHfxTzr9FTDQV84b6vAgVhU3FTeCRQNiuRNv79Ni0V3mkEVNRhpqo2gpMjp5iOIR1w2_EISPENaqzoXohVXl2QI3ryXlRCB4FaIIaxynnWXWY6QBgBgNiIZ6agD1NBoNGg0ajXpUCXUAIJDer78AAOB_AwAAQIDbCwAAe_NWlVlTJllBMTZoWkKPAAAA8A" name="apt-get.com"> </frameset> <noframes> <body><a href="http://apt-get.com?epl=5PfLSSqWrYDAt-gbwMDK_rA3b1UJCYVTJHfxTzr9FTDQV84b6vAgVhU3FTeCRQNiuRNv79Ni0V3mkEVNRhpqo2gpMjp5iOIR1w2_EISPENaqzoXohVXl2QI3ryXlRCB4FaIIaxynnWXWY6QBgBgNiIZ6agD1NBoNGg0ajXpUCXUAIJDer78AAOB_AwAAQIDbCwAAe_NWlVlTJllBMTZoWkKPAAAA8A">Click here to go to apt-get.com</a>.</body> </noframes> </html>

    Read the article

< Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445  | Next Page >